← Registro de alterações

v0.6.1

A large release. It adds a full service-to-service networking plane, around-the-clock container health monitoring, and real analytics with visitor geography and usage history — plus a self-contained containerized mail engine, a fleet-wide infrastructure view with one-click updates, an audit log you can filter and attribute, Telegram alerts, and a Node-based installer that retires the last of the Bun crash class.

1 versão
7 de ago.2026v0.6.1RecursosCorreçõesBreaking52 atualizações

Rede serviço a serviço

  • Qualquer projeto agora pode ser conectado a outro pela rede interna

    Every project (a plain single-app, a raw Compose stack, a monorepo, or an imported one) now shows a Connection card with its internal address (http://<alias>:<port>) e pode ser escolhido como uma fonte "Usar em um projeto". Anteriormente, apenas aplicativos de catálogo com um bloco de conexão declarado, ou pilhas Compose de vários serviços, eram acessíveis internamente; um projeto de aplicativo único não tinha nenhum endereço interno. A acessibilidade no mesmo limite é automática e o cruzamento de um limite permanece explícito – um alias só se torna acessível quando você conecta um consumidor à rede. Somente auto-hospedado e ignorado para sites estáticos (sem porta de escuta) e aplicativos hospedados na nuvem (que se vinculam ao Público).

  • Dê a um serviço um nome de host interno personalizado

    A service can carry a custom east-west DNS alias that resolves alongside its default name, set from the service's Settings tab and available to single-app, Compose, and monorepo services alike. Openship normalizes it to a valid hostname and rejects one that collides with another service on the same project network, and the internal-address card shows the alias its containers actually answer to. Self-hosted only.

  • Um editor de configurações de serviço mais claro

    The service Settings tab groups fields into labelled sections and swaps free-text boxes for structured editors: ports and volumes are entered as chips (with per-item limits enforced as you type) and depends-on is a picker of the project's other services. The image and build-from-source fields are shown together — fill either, and a build context wins over a stale image — instead of an image/build mode toggle.

Integridade e incidentes do contêiner

  • OpenShip monitora seus contêineres 24 horas por dia, não apenas durante a implantação

    Until now a container was health-checked exactly once, during the ~15s window right after a deploy, and then never looked at again unless a human was staring at the project page. A new health watch polls every server's Docker daemon once a minute (and reacts within about 10 seconds when Docker itself reports a container dying or restarting), so an app that falls over or drops into a crash loop at 3am raises an alert through your existing notification channels instead of waiting for a user to complain. Self-hosted only.

  • Contêineres quebrados chamam você uma vez, não a cada minuto

    A container stuck in a restart loop is broken on every poll, so a naive watcher would fire 60 alerts an hour about one fault. Instead each fault becomes a single incident: one message when it opens, one more only if it gets strictly worse (unhealthy → crash looping → down), and one all-clear that tells you how long it was down. A fault must be observed twice before it notifies, and an in-flight deploy, an operator's own docker stop, ou um projeto desativado nunca dispara um alarme falso.

  • Um servidor inacessível é um alerta, não um por aplicativo nele

    When a box's Docker daemon stops answering, Openship opens a single server-level incident that names how many projects it can no longer monitor, and freezes those projects' health rather than falsely marking them recovered. The record is durable, so a box that has been down for days does not re-page every time the control plane restarts.

  • Uma guia Saúde em cada projeto, com 30 dias de histórico de incidentes

    Each project gets a Health tab listing its currently open incidents plus a rolling 30-day history of resolved ones with downtime durations. It also states whether monitoring is actually switched on (an operator toggle in the Jobs module) and surfaces the server's own outage when a box is unreachable, so an empty tab is never misread as "all good." Self-hosted only.

Análise e uso de recursos

  • Veja de onde vêm seus visitantes

    The Monitoring tab draws a per-country choropleth of visitors alongside a ranked list, and animates real-time request ripples fed by the same stream the Logs tab tails, so you can watch where requests are landing right now. It works the same way self-hosted and on Cloud, and it can tell "no visitors yet" apart from "geo lookups aren't set up on this box," which used to render identically as an empty map. On a multi-domain project the whole view scopes to a chosen domain.

  • As contagens de visitantes agora são números reais, não contagens de solicitações

    The dashboard's visitor figure was a request count relabelled "unique IPs," so five page views from one browser counted as five people. It's now a genuine count of distinct visitors, deduplicated at the edge with a per-day salted hash that never stores an address or a per-visitor row — the number is honest while still collecting no behavioural data on your end users.

  • Principais caminhos e códigos de resposta que contêm dados reais por trás deles

    The Top Paths table was hardcoded empty and error rate couldn't be answered from anything saved. Both are real now: the daily rollup records normalized request paths (query strings stripped, ids collapsed, so tokens never become keys) and the full status-code mix, and a new card expands each 2xx/3xx/4xx/5xx class to the exact codes beneath it. On self-hosted, per-path aggregation is opt-in per project (a toggle, default off, including on existing projects) because it adds measurable work to every request the edge handles; on Cloud paths are aggregated automatically. Every other analytics dimension is unchanged.

  • O histórico de uso é mantido, para que você possa ver o que levou à falha

    CPU, memory and network usage used to exist only as a live stream that vanished when you closed the tab, so "was memory climbing before it got OOM-killed at 3am" had no answer. Usage is now sampled on a schedule into 5-minute buckets and charted over time, per service. A Compose project reports its whole stack with a per-service breakdown and an All/service scope picker instead of just the one container the primary service owned; a static site (nothing to measure) now says so plainly instead of showing four zeroed metrics. Self-hosted Docker deployments; bare non-Docker deployments report zero network, since per-process accounting isn't available there.

  • Domínios ocupados mantêm suas análises

    A domain pushing more than about 2 GB in a single minute (roughly 286 Mbps — routine for video or large downloads) used to overflow a 32-bit byte counter and kill the analytics scrape for that entire domain, so the busiest sites were precisely the ones with no analytics. The bandwidth counters are now 64-bit and collection keeps up. Self-hosted edge.

  • A análise não desaparece mais silenciosamente quando ninguém está olhando

    Traffic analytics live in the edge's memory under a TTL and were only flushed to the database when someone opened a project's Analytics tab, so a project nobody viewed for a day lost its per-minute data. A background scrape job now persists every server's analytics on a schedule whether or not anyone is watching, collecting a whole server in one pass instead of a separate memory scan per domain.

  • As dicas de ferramentas do gráfico podem ser lidas em todos os temas

    Tooltips were effectively transparent in the dark themes (plot lines showed straight through the text) and on light cards the hover marker rendered as a stray white block below the tooltip. Both are fixed with a shared tooltip style reused across the monitoring and billing charts.

Borda e proxy reverso

  • Ajuste o proxy reverso por projeto

    A project's Routing settings now expose a full set of proxy tunables instead of a handful: raise or entirely remove the upload size limit, set connect/read/send/keepalive timeouts, control response buffering and gzip level, turn on HTTP/2, tighten request-header limits, and verify TLS to the upstream — each value validated before it reaches the generated nginx config and labelled with its own directive name. On self-hosted it also reads back what the edge is actually serving next to what you saved, flags any drift in colour, and offers a one-click adopt, so a hand-edited vhost or a value the sanitizer dropped can't quietly disagree with your settings. Self-hosted only.

  • A análise por país e as regras do país funcionam na borda conteinerizada

    The containerized edge shipped without the MaxMind geo library or its country database, so every lookup returned nothing: no per-country analytics were recorded, and country-based route rules failed closed (a single-country ban silently blocked all traffic). The library and a GeoLite2 database — parsed and validated before shipping — are now baked into the edge image, so geo works from a box's first install with no runtime download.

  • Corrija a identidade do visitante atrás de Cloudflare ou de um balanceador de carga

    Behind a proxy the edge treated the proxy as the client, which broke four things at once: visitor country resolved to the PoP, distinct-visitor counts collapsed, per-IP rate limits put the whole planet in one bucket, and IP bans banned a PoP instead of a visitor. The edge now recovers the real client address from CF-Connecting-IP, confiando apenas nos intervalos publicados de Cloudflare como ponto de conexão.

  • As regras por rota atingem o limite mesmo quando não estão no loopback da API

    Pushing a project's route rules to a local edge now goes through the same resolved edge-management path as the rest of Openship instead of assuming the edge lives on the API host's own loopback. On setups where it doesn't — such as the containerized edge — rate-limit, ban, and country rules now actually take effect.

  • A pílula "Edge ready" corresponde ao estado real do servidor

    Edge readiness is now read from whether Openship's edge container is actually running, the same fact the Infrastructure tab and System Health use. Before, a leftover bare-host OpenResty install could make the pill claim "ready" while the server tab reported the edge as down.

Domínios personalizados e gratuitos

  • Grátis .opsh.io domínios só roteiam para um servidor cujo controle você comprovou

    Openship Cloud's shared edge now forwards a free subdomain to your server only after that server answers a challenge proving it owns the target, a proof that lasts 90 days and that Cloud re-checks about a week before it lapses. Openship prepares the box to answer the moment you set up its edge, so a free domain added later works without a redeploy, and a background sweep re-asserts, reads back over the server's own public address, and re-verifies anything expired — so a box left undeployed for months no longer silently loses its free URLs. A slug can't be pointed at someone else's box, and a server that can't yet answer is told why. Requires Openship Cloud.

  • Domínios gratuitos e personalizados agora funcionam em sites estáticos

    Adding a free .opsh.io domínio para um projeto estático usado para registrar nada no limite, então a URL passou para o curinga sem nenhuma origem por trás dele; editar o domínio de um projeto estático não gravou nenhum vhost até a próxima reimplantação. Ambos agora emitem uma rota real no instante em que você salva, servindo os arquivos construídos do projeto - o mesmo comportamento que os aplicativos proxy já tinham.

  • Um certificado que foi emitido, mas depois encontrou um obstáculo, não está mais perdido

    If an ACME order completed but a later step failed (the vhost rewrite, the reload, or the read-back), the domain stayed stuck in "provisioning" with no expiry recorded, which made it invisible to the renewal sweep — a valid certificate then sat on the edge and expired ~90 days later. Openship now re-reads the edge after a failed issuance and records a certificate that's actually present, so renewal stays scheduled.

  • Domínios personalizados inválidos são rejeitados na porta

    Setting a custom domain to something that isn't a public hostname (localhost, um IP simples, um único rótulo ou um valor com um caminho/porta/esquema) usado para retornar sucesso, criar uma linha de domínio pendente inoperante e até mesmo escrever um server_name localhost; vhost na borda compartilhada. Os caminhos de gravação agora validam nomes de host personalizados e recusam nomes inválidos, ao mesmo tempo em que permitem que um projeto que já contém um valor inválido seja editado e removido.

  • A edição de um domínio gratuito não mostra mais uma falsa "Ação necessária"

    A single edit could sync the same free subdomain to Cloud twice, and the two racing challenges reset each other's token, so the route worked but the project reported "Action Required" anyway. Callers that run their own managed-edge sync now suppress the duplicate, so each edit issues one challenge and the status reflects reality.

  • Redirecionamentos e limites de upload entram em vigor ao salvar

    Raising a route's upload limit or adjusting its timeouts now applies as soon as you save instead of waiting for the next redeploy, and a domain redirect is applied live to static-site domains too, not only to proxied apps.

E-mail

  • O Mail funciona como um mecanismo independente em vez de assumir o controle do seu servidor

    Setting up mail no longer installs iRedMail's daemons directly onto the host or reboots the box. Postfix, Dovecot, spam and virus filtering, and DKIM now run inside a single openship-mail contêiner com seu banco de dados vmail em um arquivo secundário Postgres, em rede de host para que o e-mail ainda veja IPs reais do cliente e a borda permaneça fora do caminho de dados do e-mail. A configuração se resume a oito etapas cujos únicos pré-requisitos são Docker e a borda do openship, e cada parte do estado do correio (fila, maildirs, chaves DKIM, configuração) reside em montagens de ligação do host, portanto, a atualização é um pull-and-recreate que mantém seus dados. Somente auto-hospedado.

  • Mail usa a mesma borda e TLS que todo o resto

    Mail setup no longer stands up its own host OpenResty and certbot on the side. The certificate for mail.<domain> é emitido por meio da borda aberta compartilhada, o mesmo caminho que o TLS de qualquer outro domínio segue, e agora é registrado para renovação como qualquer outro domínio - um certificado de correio em uma borda conteinerizada (sem temporizador certbot de host) usado para simplesmente expirar aproximadamente 90 dias após a instalação, silenciosamente; uma renovação com falha agora gera uma notificação.

  • Servidores de e-mail configurados antes da conteinerização continuam funcionando

    The move to containers is topology-aware, so a server whose mail was installed the old way (system daemons, database on the host) still reports accurate component health and stays fully manageable: SQL queries, outbound SES/SMTP relay config, and daemon restarts all target the right engine. When the engine genuinely is stopped or was never installed, admin actions now return a clear message telling you to restart it or re-run setup instead of a bare 500 leaking a Docker "No such container" error.

Infraestrutura remota

  • Veja todas as bordas gerenciadas e contêineres de correio em um só lugar

    A new Infrastructure view lists each server's edge and mail container with the image version it's running against the version this release pins (for example edge 0.4.0 → 0.5.0), and flags which are behind, stopped, or missing. An attention rollup surfaces the ones that genuinely need hands — an edge that's down, or absent on a box that hosts projects — separately from the ones that merely have an update available. Self-hosted only.

  • Atualizar, reparar ou instalar um contêiner sem tocar no shell

    Update swaps a behind container onto the pinned image (rollback-guarded), Fix restarts a stopped one in place, and a server with no edge gets a one-click Install that runs the first- install path with 80/443 takeover consent. Each apply streams its pull/recreate/ verify progress and survives a dropped connection, and a fleet-wide Update all / Restart stopped does the same across every server at once. Self-hosted only.

  • Atualize automaticamente sua infraestrutura remota na atualização

    A new instance-wide toggle lets the control plane update every remote edge and mail container automatically when you upgrade Openship (its APP_VERSION avança), para que o infra da sua frota rastreie a versão que você está executando sem varredura manual. É do lado do servidor, por isso funciona também no desktop, diferente da atualização automática do próprio aplicativo de desktop e desativado por padrão. Somente auto-hospedado.

  • A detecção de desvio permanece atualizada por conta própria

    With auto-scan on (the default), opening the Infrastructure tab or the home page quietly runs one detect-only scan when the cached state is stale, throttled to about every 30 minutes per browser, so the attention dot reflects reality without pressing Scan. It only refreshes what's shown — it never applies an update, which stays the separate auto-update toggle. Self-hosted only.

  • Caixas legadas não são mais sinalizadas como quebradas

    A server converted to the containerized edge kept listing its leftover host OpenResty as a component with an Update button for a config nothing loads; those superseded host modules are now dropped from the view. And a legacy host-native mail engine (systemd Postfix/Dovecot) that was quietly delivering mail used to show up as "Stopped, container missing" — it's now labelled as not containerized rather than inventing a version. Self-hosted only.

Docker migração

  • Os sites migrados mantêm o limite de upload e os tempos limite sob os quais foram executados

    When you move or take over a Docker stack, the reverse-proxy tunables the source vhost declared (upload size limit, upstream read timeouts) are now carried onto the migrated project before the new edge vhost is rendered. Previously the site silently reverted to nginx's 1 MB / 60 s defaults at cutover, so the first large upload after a move failed with a 413 and nothing tied it back to the migration. Adoption is additive: a limit you set by hand always outranks a value inferred from the old box. Self-hosted only.

  • Adotar uma pilha não republica mais portas internas

    A compose service that published a container port on a random host port (a single-part ports: entrada, por ex. um banco de dados 5432 (a origem nunca foi verdadeiramente exposta) agora não é exposto durante a adoção, em vez de ser republicado no destino, para que uma migração não exponha desnecessariamente serviços internos ou colida com o que já contém uma porta de host. A porta ainda é mostrada no assistente para que você possa rotear até ela, e o tráfego entre serviços continua sendo resolvido por nome na rede compartilhada. Somente auto-hospedado.

  • O assistente informa quais env vars não foram transportados

    When adopting a foreign stack, environment variables that exactly match the image's baked-in defaults are dropped rather than imported as explicit config (the image still supplies them at runtime). The wizard now lists exactly which keys were skipped and why — common with Coolify/Nixpacks images that bake config as ENV layers — so you know what to re-enter if you later change the image.

  • Não há mais nomes de host fantasmas no assistente de importação

    The wizard used to invent a hostname from the project name whenever a step had no route chosen, labelling port fields, previewing monorepo sub-app hosts, and even wiring the "Visit Site" button to a host that would never exist. It now shows only hosts your config actually names, and hides "Visit Site" entirely when the deployment has no public domain.

Registro de auditoria

  • Veja exatamente o que seu assistente de IA mudou

    Every audit entry now records where the action came in from (the dashboard, an MCP client, the CLI, the API, a webhook, or the system itself), and you can filter the log down to a single source. Isolating MCP-driven activity finally answers "what did the AI assistant do," which was impossible before because an MCP write and a CLI write produced identical rows. Entries written before this release show as an honest "unknown" rather than being mislabelled.

  • Desative a auditoria e controle por quanto tempo ela será mantida

    Each organization can switch audit recording on or off and pick a retention window (7, 30, 90, 180 or 365 days). Turning recording off stops new entries but never touches the ones already written, and the act of disabling is itself logged first, so the trail always explains why it went quiet. The switch is per-organization, so on a shared cloud instance one tenant can't disable everyone's audit log.

  • Uma verdadeira barra de filtros sobre o log

    You can narrow by category, actor, date range and free-text search, with a live count on every category tab. Search resolves project, server and domain names, so typing a name like "api-gateway" turns up entries that only ever stored an opaque id, and rows now display the human name of the affected resource, resolved server-side in one batched lookup per page.

  • Paginação do log não ignora mais ou repete linhas

    Entries that share a timestamp are now ordered by a stable tiebreaker, so scrolling through pages no longer reshuffles them; two entries created in the same instant could previously appear twice or vanish between pages.

Notificações

  • Envie alertas para o Telegram

    Telegram joins email, Slack, Discord, and Teams as a notification channel: point a BotFather bot at a chat, group, or forum topic and Openship delivers your deploy, health, and job alerts there. The bot token is stored encrypted, and the channel list shows which bot does the sending.

  • As configurações de notificação auto-hospedadas eliminam os botões que nunca podem ser acionados

    On a self-hosted box the billing notification categories are fed by the SaaS billing system, so they were switches that could never send anything. They no longer appear, and the remaining categories are organized into tabbed groups in Settings.

Instalar e embalar

  • OpenShip agora instala e atualiza no Node, nunca um Bun global

    O curl | sh e os instaladores do PowerShell baixam uma carga útil CLI independente e verificada pelo sha256 que é executada no Node: eles usam o Node 22+ do sistema se você tiver um e, caso contrário, vendem um Node 22 oficial de nodejs.org para ~/.openship, e eles migrarão você silenciosamente de qualquer instalação anterior do Global-Bun sem tocar no seu próprio Bun. openship update segue o mesmo caminho - baixe novamente a carga verificada, atualize o tempo de execução primeiro - para que uma atualização que aumente o piso do nó se cure em vez de quebrar. Isso retira a classe de travamento Bun-vs-ssh2 que poderia eliminar operações SSH remotas.

  • O servidor de e-mail é enviado como imagem oficial

    Openship's official multi-arch (amd64 + arm64) image set, built and published to GHCR and Docker Hub each release, now includes openship-mail junto com a API, o painel e as imagens de borda, para que um mecanismo de e-mail auto-hospedado não precise mais ser criado a partir do código-fonte.

  • openship up agora funciona em Docker sem raiz em vez de falhar criptograficamente

    Bringing up the compose stack on a rootless daemon used to abort the install with Docker's opaque "error while creating mount source path … permission denied," because a rootless daemon can't create the edge's bind-mount directories under root-owned paths. The CLI now creates those directories itself and, when it can't, prints the exact one-time sudo mkdir/chown comandos para executar (#372).

Implantações e composição

  • Uma implantação em funcionamento nunca é registrada como falha

    Build output that carried a raw NUL byte or a broken Unicode character (as a failed docker exec faz quando ele derrama seu fluxo multiplexado, cabeçalhos de quadro e tudo) fez com que a gravação do log falhasse e OpenShip interpretou incorretamente a gravação rejeitada como a própria implantação falhando: uma implantação ativa e em execução foi marcada como falha e seus contêineres foram destruídos, enquanto a visualização de implantação permaneceu presa em "Implantação". Os logs de build armazenados agora são higienizados e têm tamanho limitado, a gravação do resultado elimina qualquer log ou blob de erro Postgres recusa em vez de perder o status, e o evento de terminal que fecha a transmissão ao vivo sempre é acionado.

  • Seu URL de acesso e portas de domínio personalizado sobrevivem a uma reimplantação

    A project's deploy target is now stored durably on the project itself (a new server_id coluna) em vez de viver apenas nos metadados voláteis da implantação mais recente. Antes, um instantâneo novo ou parcial poderia perder essa ligação, regredir silenciosamente o projeto para uma implantação local, retirar as portas de seus domínios personalizados (um 502) e redefinir a URL de acesso para localhost:3000; os projetos existentes hospedados no servidor são preenchidos, portanto, isso não pode prejudicá-los na próxima reimplantação. Um domínio personalizado verificado também é preservado em vez de excluído ou apagado, mesmo quando o conjunto de endpoints de uma implantação o omite. Somente auto-hospedado.

  • Uma instalação de domínio gratuito agora tem um destino de implantação

    A box set up with a free .opsh.io O domínio poderia terminar a integração sem servidores listados e sem nada para implantar, porque o registro da linha local "Este servidor" dependia de uma etapa de inicialização cujo caminho nunca é executado. A caixa agora materializa sua própria linha de destino de implantação quando os servidores são listados pela primeira vez, quando ela se conecta a OpenShip Cloud e na redefinição do administrador. Anexando um grátis .opsh.io domínio para um projeto posteriormente não precisa mais ser reimplantado primeiro, já que cada implantação agora prepara a caixa para responder à verificação de propriedade. Somente auto-hospedado.

  • Os domínios de serviço respeitam seu limite de upload e configurações de proxy

    A compose service's own domain ignored the project's reverse-proxy tuning, so the main app would accept a 50 MB upload while the same project's service domain rejected it at nginx's 1 MB default with a 413. Those settings now apply to every domain a project writes — per-service, static, single-domain composites, path fan-out, and single-app native deploys. Self-hosted only.

  • URLs de serviço de aplicativo de catálogo são resolvidos por porta e nunca ficam em branco

    Apps that route one container port to a domain and leave another port-only (Convex, for one) used to get an empty or self-referential origin injected (CONVEX_SITE_ORIGIN="", ou um 127.0.0.1 que dentro de um contêiner aponta para o próprio contêiner). Cada porta agora é resolvida de forma independente, um serviço somente de porta retorna ao real alcançável da caixa http://host:port, e um {{publicUrl:…}} o token que ainda não pode ser resolvido é deixado sem definição — portanto, o padrão da própria imagem se aplica — com um aviso alto no log de implantação em vez de um espaço em branco silencioso.

  • O aviso de roteamento informa quando a borda é o problema

    When a deploy succeeds but its domains aren't being served, the post-deploy warning now checks why: if the edge container itself is down it tells you to bring the edge back up, instead of sending you off to your DNS provider to debug routes that are actually fine. Self-hosted only.

Nota de atualização: esta versão supera as versões de borda fixada e imagem de correio. Em auto-hospedado, abra a nova visualização Infraestrutura para atualizar a borda de cada servidor e o contêiner de correio na imagem fixada — ou ative a atualização automática em toda a instância para que o plano de controle faça isso em cada atualização.