7. Aug.2026v0.6.1FunktionenKorrekturenBreaking52 AktualisierungenLink kopieren
Service-to-Service-Vernetzung
Jedes Projekt kann nun über das interne Netzwerk mit einem anderen verbunden werden
Every project (a plain single-app, a raw Compose stack, a monorepo, or an imported one) now shows a Connection card with its internal address (
http://<alias>:<port>) und kann als Quelle „Verwendung in einem Projekt“ ausgewählt werden. Bisher waren intern nur Katalog-Apps mit einem deklarierten Verbindungsblock oder Compose-Stacks mit mehreren Diensten erreichbar. Ein Einzel-App-Projekt hatte überhaupt keine interne Adresse. Die Erreichbarkeit über die gleiche Grenze erfolgt automatisch und das Überschreiten einer Grenze bleibt explizit – ein Alias wird erst erreichbar, wenn Sie einen Verbraucher mit dem Netzwerk verbinden. Nur selbst gehostet und bei statischen Websites (kein Überwachungsport) und in der Cloud gehosteten Apps (die stattdessen über öffentliche Links verlinkt werden) übersprungen.Geben Sie einem Dienst einen benutzerdefinierten internen Hostnamen
A service can carry a custom east-west DNS alias that resolves alongside its default name, set from the service's Settings tab and available to single-app, Compose, and monorepo services alike. Openship normalizes it to a valid hostname and rejects one that collides with another service on the same project network, and the internal-address card shows the alias its containers actually answer to. Self-hosted only.
Ein übersichtlicherer Diensteinstellungseditor
The service Settings tab groups fields into labelled sections and swaps free-text boxes for structured editors: ports and volumes are entered as chips (with per-item limits enforced as you type) and depends-on is a picker of the project's other services. The image and build-from-source fields are shown together — fill either, and a build context wins over a stale image — instead of an image/build mode toggle.
Containerzustand und Vorfälle
OpenShip überwacht Ihre Container rund um die Uhr, nicht nur bei der Bereitstellung
Until now a container was health-checked exactly once, during the ~15s window right after a deploy, and then never looked at again unless a human was staring at the project page. A new health watch polls every server's Docker daemon once a minute (and reacts within about 10 seconds when Docker itself reports a container dying or restarting), so an app that falls over or drops into a crash loop at 3am raises an alert through your existing notification channels instead of waiting for a user to complain. Self-hosted only.
Kaputte Container rufen Sie einmal an, nicht jede Minute
A container stuck in a restart loop is broken on every poll, so a naive watcher would fire 60 alerts an hour about one fault. Instead each fault becomes a single incident: one message when it opens, one more only if it gets strictly worse (unhealthy → crash looping → down), and one all-clear that tells you how long it was down. A fault must be observed twice before it notifies, and an in-flight deploy, an operator's own
docker stopoder ein deaktiviertes Projekt löst niemals einen Fehlalarm aus.Bei einem nicht erreichbaren Server handelt es sich um eine einzige Warnung, nicht um eine pro App
When a box's Docker daemon stops answering, Openship opens a single server-level incident that names how many projects it can no longer monitor, and freezes those projects' health rather than falsely marking them recovered. The record is durable, so a box that has been down for days does not re-page every time the control plane restarts.
Eine Registerkarte „Gesundheit“ für jedes Projekt mit 30-tägigem Vorfallverlauf
Each project gets a Health tab listing its currently open incidents plus a rolling 30-day history of resolved ones with downtime durations. It also states whether monitoring is actually switched on (an operator toggle in the Jobs module) and surfaces the server's own outage when a box is unreachable, so an empty tab is never misread as "all good." Self-hosted only.
Analyse und Ressourcennutzung
Sehen Sie, woher Ihre Besucher kommen
The Monitoring tab draws a per-country choropleth of visitors alongside a ranked list, and animates real-time request ripples fed by the same stream the Logs tab tails, so you can watch where requests are landing right now. It works the same way self-hosted and on Cloud, and it can tell "no visitors yet" apart from "geo lookups aren't set up on this box," which used to render identically as an empty map. On a multi-domain project the whole view scopes to a chosen domain.
Bei den Besucherzahlen handelt es sich jetzt um reale Zahlen, nicht um die Anzahl der Anfragen
The dashboard's visitor figure was a request count relabelled "unique IPs," so five page views from one browser counted as five people. It's now a genuine count of distinct visitors, deduplicated at the edge with a per-day salted hash that never stores an address or a per-visitor row — the number is honest while still collecting no behavioural data on your end users.
Top-Pfade und Antwortcodes, hinter denen echte Daten stehen
The Top Paths table was hardcoded empty and error rate couldn't be answered from anything saved. Both are real now: the daily rollup records normalized request paths (query strings stripped, ids collapsed, so tokens never become keys) and the full status-code mix, and a new card expands each 2xx/3xx/4xx/5xx class to the exact codes beneath it. On self-hosted, per-path aggregation is opt-in per project (a toggle, default off, including on existing projects) because it adds measurable work to every request the edge handles; on Cloud paths are aggregated automatically. Every other analytics dimension is unchanged.
Der Nutzungsverlauf wird gespeichert, sodass Sie sehen können, was zu einem Absturz geführt hat
CPU, memory and network usage used to exist only as a live stream that vanished when you closed the tab, so "was memory climbing before it got OOM-killed at 3am" had no answer. Usage is now sampled on a schedule into 5-minute buckets and charted over time, per service. A Compose project reports its whole stack with a per-service breakdown and an All/service scope picker instead of just the one container the primary service owned; a static site (nothing to measure) now says so plainly instead of showing four zeroed metrics. Self-hosted Docker deployments; bare non-Docker deployments report zero network, since per-process accounting isn't available there.
Ausgelastete Domains behalten ihre Analysen
A domain pushing more than about 2 GB in a single minute (roughly 286 Mbps — routine for video or large downloads) used to overflow a 32-bit byte counter and kill the analytics scrape for that entire domain, so the busiest sites were precisely the ones with no analytics. The bandwidth counters are now 64-bit and collection keeps up. Self-hosted edge.
Analysen verschwinden nicht mehr stillschweigend, wenn niemand hinschaut
Traffic analytics live in the edge's memory under a TTL and were only flushed to the database when someone opened a project's Analytics tab, so a project nobody viewed for a day lost its per-minute data. A background scrape job now persists every server's analytics on a schedule whether or not anyone is watching, collecting a whole server in one pass instead of a separate memory scan per domain.
Diagramm-Tooltips sind in jedem Theme lesbar
Tooltips were effectively transparent in the dark themes (plot lines showed straight through the text) and on light cards the hover marker rendered as a stray white block below the tooltip. Both are fixed with a shared tooltip style reused across the monitoring and billing charts.
Edge & reverse proxy
Optimieren Sie den Reverse-Proxy pro Projekt
A project's Routing settings now expose a full set of proxy tunables instead of a handful: raise or entirely remove the upload size limit, set connect/read/send/keepalive timeouts, control response buffering and gzip level, turn on HTTP/2, tighten request-header limits, and verify TLS to the upstream — each value validated before it reaches the generated nginx config and labelled with its own directive name. On self-hosted it also reads back what the edge is actually serving next to what you saved, flags any drift in colour, and offers a one-click adopt, so a hand-edited vhost or a value the sanitizer dropped can't quietly disagree with your settings. Self-hosted only.
Länderspezifische Analysen und Länderregeln funktionieren am Container-Edge
The containerized edge shipped without the MaxMind geo library or its country database, so every lookup returned nothing: no per-country analytics were recorded, and country-based route rules failed closed (a single-country ban silently blocked all traffic). The library and a GeoLite2 database — parsed and validated before shipping — are now baked into the edge image, so geo works from a box's first install with no runtime download.
Korrigieren Sie die Besucheridentität hinter Cloudflare oder einem Load Balancer
Behind a proxy the edge treated the proxy as the client, which broke four things at once: visitor country resolved to the PoP, distinct-visitor counts collapsed, per-IP rate limits put the whole planet in one bucket, and IP bans banned a PoP instead of a visitor. The edge now recovers the real client address from
CF-Connecting-IP, wobei nur die veröffentlichten Bereiche von Cloudflare als verbindender Peer vertrauenswürdig sind.Pro-Route-Regeln erreichen den Edge auch dann, wenn er sich nicht im Loopback der API befindet
Pushing a project's route rules to a local edge now goes through the same resolved edge-management path as the rest of Openship instead of assuming the edge lives on the API host's own loopback. On setups where it doesn't — such as the containerized edge — rate-limit, ban, and country rules now actually take effect.
Die „Edge Ready“-Pille entspricht dem tatsächlichen Zustand des Servers
Edge readiness is now read from whether Openship's edge container is actually running, the same fact the Infrastructure tab and System Health use. Before, a leftover bare-host OpenResty install could make the pill claim "ready" while the server tab reported the edge as down.
Benutzerdefinierte und kostenlose Domains
Kostenlos
.opsh.ioDomänen leiten nur an einen Server weiter, dessen Kontrolle Sie nachgewiesen habenOpenship Cloud's shared edge now forwards a free subdomain to your server only after that server answers a challenge proving it owns the target, a proof that lasts 90 days and that Cloud re-checks about a week before it lapses. Openship prepares the box to answer the moment you set up its edge, so a free domain added later works without a redeploy, and a background sweep re-asserts, reads back over the server's own public address, and re-verifies anything expired — so a box left undeployed for months no longer silently loses its free URLs. A slug can't be pointed at someone else's box, and a server that can't yet answer is told why. Requires Openship Cloud.
Kostenlose und benutzerdefinierte Domains funktionieren jetzt auf statischen Websites
Adding a free
.opsh.ioDomain zu einem statischen Projekt, das verwendet wurde, um nichts am Rand zu registrieren, sodass die URL bis zum Platzhalter ohne Ursprung dahinter durchfiel; Beim Bearbeiten der Domäne eines statischen Projekts wurde bis zur nächsten erneuten Bereitstellung kein vhost erstellt. Beide geben jetzt in dem Moment, in dem Sie speichern, eine echte Route aus und stellen die erstellten Dateien des Projekts bereit – das gleiche Verhalten, das Proxy-Apps bereits hatten.Ein Zertifikat, das ausgestellt wurde, aber danach nicht mehr funktionierte, geht nicht mehr verloren
If an ACME order completed but a later step failed (the vhost rewrite, the reload, or the read-back), the domain stayed stuck in "provisioning" with no expiry recorded, which made it invisible to the renewal sweep — a valid certificate then sat on the edge and expired ~90 days later. Openship now re-reads the edge after a failed issuance and records a certificate that's actually present, so renewal stays scheduled.
Ungültige benutzerdefinierte Domänen werden an der Tür abgelehnt
Setting a custom domain to something that isn't a public hostname (
localhost, eine bloße IP, eine einzelne Bezeichnung oder ein Wert mit einem Pfad/Port/Schema), der verwendet wird, um Erfolg zurückzugeben, eine tote Zeile mit ausstehenden Domänen zu erstellen und sogar eine zu schreibenserver_name localhost;vhost auf den gemeinsamen Rand. Die Schreibpfade validieren jetzt benutzerdefinierte Hostnamen und lehnen fehlerhafte ab, während ein Projekt, das bereits einen fehlerhaften Wert enthält, diesen weiterhin bearbeiten und entfernen kann.Beim Bearbeiten einer kostenlosen Domain wird nicht mehr die falsche Meldung „Aktion erforderlich“ angezeigt.
A single edit could sync the same free subdomain to Cloud twice, and the two racing challenges reset each other's token, so the route worked but the project reported "Action Required" anyway. Callers that run their own managed-edge sync now suppress the duplicate, so each edit issues one challenge and the status reflects reality.
Weiterleitungen und Upload-Limits werden beim Speichern wirksam
Raising a route's upload limit or adjusting its timeouts now applies as soon as you save instead of waiting for the next redeploy, and a domain redirect is applied live to static-site domains too, not only to proxied apps.
Mail läuft als eigenständige Engine, anstatt Ihren Server zu übernehmen
Setting up mail no longer installs iRedMail's daemons directly onto the host or reboots the box. Postfix, Dovecot, spam and virus filtering, and DKIM now run inside a single
openship-mailContainer mit seiner Vmail-Datenbank in einem Postgres Sidecar, hostvernetzt, sodass Mail weiterhin echte Client-IPs sieht und der Edge außerhalb des Mail-Datenpfads bleibt. Die Einrichtung umfasst nur acht Schritte, deren einzige Voraussetzungen Docker und der OpenShip-Edge sind, und jeder E-Mail-Status (Warteschlange, E-Mail-Verzeichnisse, DKIM-Schlüssel, Konfiguration) lebt auf Host-Bind-Mounts, sodass das Upgrade ein Pull-and-Recreate-Vorgang ist, bei dem Ihre Daten erhalten bleiben. Nur selbst gehostet.Mail verwendet den gleichen Edge und TLS wie alles andere
Mail setup no longer stands up its own host OpenResty and certbot on the side. The certificate for
mail.<domain>wird über den gemeinsamen OpenShip-Edge ausgestellt, den gleichen Weg, den das TLS jeder anderen Domain nimmt, und wird jetzt wie jede andere Domain zur Erneuerung aufgezeichnet – ein E-Mail-Zertifikat auf einem Container-Edge (kein Host-Certbot-Timer), das früher einfach ca. 90 Tage nach der Installation stillschweigend ablief; Eine fehlgeschlagene Verlängerung löst nun eine Benachrichtigung aus.Vor der Containerisierung eingerichtete Mailserver funktionieren weiterhin
The move to containers is topology-aware, so a server whose mail was installed the old way (system daemons, database on the host) still reports accurate component health and stays fully manageable: SQL queries, outbound SES/SMTP relay config, and daemon restarts all target the right engine. When the engine genuinely is stopped or was never installed, admin actions now return a clear message telling you to restart it or re-run setup instead of a bare 500 leaking a Docker "No such container" error.
Remote-Infrastruktur
Sehen Sie alle verwalteten Edge- und Mail-Container an einem Ort
A new Infrastructure view lists each server's edge and mail container with the image version it's running against the version this release pins (for example edge 0.4.0 → 0.5.0), and flags which are behind, stopped, or missing. An attention rollup surfaces the ones that genuinely need hands — an edge that's down, or absent on a box that hosts projects — separately from the ones that merely have an update available. Self-hosted only.
Aktualisieren, reparieren oder installieren Sie einen Container, ohne eine Shell zu berühren
Update swaps a behind container onto the pinned image (rollback-guarded), Fix restarts a stopped one in place, and a server with no edge gets a one-click Install that runs the first- install path with 80/443 takeover consent. Each apply streams its pull/recreate/ verify progress and survives a dropped connection, and a fleet-wide Update all / Restart stopped does the same across every server at once. Self-hosted only.
Aktualisieren Sie Ihre Remote-Infrastruktur beim Upgrade automatisch
A new instance-wide toggle lets the control plane update every remote edge and mail container automatically when you upgrade Openship (its
APP_VERSIONbewegt sich vorwärts), sodass die Infrastruktur Ihrer Flotte die von Ihnen verwendete Version verfolgt, ohne dass eine manuelle Suche erforderlich ist. Da es serverseitig ist, funktioniert es auch auf dem Desktop, unterscheidet sich von der automatischen Aktualisierung der Desktop-App und ist standardmäßig deaktiviert. Nur selbst gehostet.Die Drifterkennung bleibt selbstständig aktiv
With auto-scan on (the default), opening the Infrastructure tab or the home page quietly runs one detect-only scan when the cached state is stale, throttled to about every 30 minutes per browser, so the attention dot reflects reality without pressing Scan. It only refreshes what's shown — it never applies an update, which stays the separate auto-update toggle. Self-hosted only.
Ältere Kartons werden nicht mehr als kaputt gekennzeichnet
A server converted to the containerized edge kept listing its leftover host OpenResty as a component with an Update button for a config nothing loads; those superseded host modules are now dropped from the view. And a legacy host-native mail engine (systemd Postfix/Dovecot) that was quietly delivering mail used to show up as "Stopped, container missing" — it's now labelled as not containerized rather than inventing a version. Self-hosted only.
Docker Migration
Migrierte Websites behalten das Upload-Limit und die Zeitüberschreitungen bei, unter denen sie liefen
When you move or take over a Docker stack, the reverse-proxy tunables the source vhost declared (upload size limit, upstream read timeouts) are now carried onto the migrated project before the new edge vhost is rendered. Previously the site silently reverted to nginx's 1 MB / 60 s defaults at cutover, so the first large upload after a move failed with a 413 and nothing tied it back to the migration. Adoption is additive: a limit you set by hand always outranks a value inferred from the old box. Self-hosted only.
Durch die Übernahme eines Stacks werden interne Ports nicht mehr erneut veröffentlicht
A compose service that published a container port on a random host port (a single-part
ports:Eintrag, z.B. 5432 (die Quelle einer Datenbank wurde nie wirklich offengelegt) wird jetzt während der Einführung nicht offengelegt, anstatt erneut auf dem Ziel veröffentlicht zu werden, sodass eine Migration nicht unnötig interne Dienste offenlegt oder mit dem kollidiert, was bereits über einen Host-Port verfügt. Der Port wird weiterhin im Assistenten angezeigt, sodass Sie ihn weiterleiten können, und der Dienst-zu-Dienst-Verkehr wird weiterhin nach Namen über das gemeinsam genutzte Netzwerk aufgelöst. Nur selbst gehostet.Der Assistent teilt Ihnen mit, welche Umgebungsvariablen nicht übertragen wurden
When adopting a foreign stack, environment variables that exactly match the image's baked-in defaults are dropped rather than imported as explicit config (the image still supplies them at runtime). The wizard now lists exactly which keys were skipped and why — common with Coolify/Nixpacks images that bake config as ENV layers — so you know what to re-enter if you later change the image.
Keine Phantom-Hostnamen mehr im Importassistenten
The wizard used to invent a hostname from the project name whenever a step had no route chosen, labelling port fields, previewing monorepo sub-app hosts, and even wiring the "Visit Site" button to a host that would never exist. It now shows only hosts your config actually names, and hides "Visit Site" entirely when the deployment has no public domain.
Audit-Protokoll
Sehen Sie genau, was Ihr KI-Assistent geändert hat
Every audit entry now records where the action came in from (the dashboard, an MCP client, the CLI, the API, a webhook, or the system itself), and you can filter the log down to a single source. Isolating MCP-driven activity finally answers "what did the AI assistant do," which was impossible before because an MCP write and a CLI write produced identical rows. Entries written before this release show as an honest "unknown" rather than being mislabelled.
Schalten Sie das Auditing aus und steuern Sie, wie lange es aufbewahrt wird
Each organization can switch audit recording on or off and pick a retention window (7, 30, 90, 180 or 365 days). Turning recording off stops new entries but never touches the ones already written, and the act of disabling is itself logged first, so the trail always explains why it went quiet. The switch is per-organization, so on a shared cloud instance one tenant can't disable everyone's audit log.
Eine echte Filterleiste über dem Protokoll
You can narrow by category, actor, date range and free-text search, with a live count on every category tab. Search resolves project, server and domain names, so typing a name like "api-gateway" turns up entries that only ever stored an opaque id, and rows now display the human name of the affected resource, resolved server-side in one batched lookup per page.
Beim Paginieren des Protokolls werden keine Zeilen mehr übersprungen oder wiederholt
Entries that share a timestamp are now ordered by a stable tiebreaker, so scrolling through pages no longer reshuffles them; two entries created in the same instant could previously appear twice or vanish between pages.
Benachrichtigungen
Senden Sie Benachrichtigungen an Telegram
Telegram joins email, Slack, Discord, and Teams as a notification channel: point a BotFather bot at a chat, group, or forum topic and Openship delivers your deploy, health, and job alerts there. The bot token is stored encrypted, and the channel list shows which bot does the sending.
Bei selbstgehosteten Benachrichtigungseinstellungen entfallen die Schalter, die niemals ausgelöst werden können
On a self-hosted box the billing notification categories are fed by the SaaS billing system, so they were switches that could never send anything. They no longer appear, and the remaining categories are organized into tabbed groups in Settings.
Installieren und verpacken
OpenShip wird jetzt auf Node installiert und aktualisiert, niemals ein globaler Bun
Die
curl | shund PowerShell-Installer laden eine eigenständige, SHA256-verifizierte CLI-Nutzlast herunter, die unter Node läuft: Sie verwenden Ihren System-Node 22+, falls Sie einen haben, und stellen andernfalls einen offiziellen Node 22 von nodejs.org bereit~/.openship, und sie migrieren Sie stillschweigend von allen vorherigen globalen Bun-Installationen, ohne Ihr eigenes Bun zu berühren.openship updategeht den gleichen Weg – laden Sie die verifizierte Nutzlast erneut herunter und aktualisieren Sie zuerst die Laufzeit – sodass sich ein Upgrade, das den Node-Floor erhöht, selbst heilt, anstatt kaputt zu gehen. Dadurch wird die Absturzklasse Bun-vs-ssh2 eingestellt, die Remote-SSH-Vorgänge blockieren könnte.Der Mailserver wird als offizielles Bild ausgeliefert
Openship's official multi-arch (amd64 + arm64) image set, built and published to GHCR and Docker Hub each release, now includes
openship-mailneben der API, dem Dashboard und den Edge-Images, sodass eine selbstgehostete Mail-Engine nicht mehr aus dem Quellcode erstellt werden muss.openship upFunktioniert jetzt unter rootless Docker, anstatt kryptisch auszufallenBringing up the compose stack on a rootless daemon used to abort the install with Docker's opaque "error while creating mount source path … permission denied," because a rootless daemon can't create the edge's bind-mount directories under root-owned paths. The CLI now creates those directories itself and, when it can't, prints the exact one-time
sudo mkdir/chownBefehle zum Ausführen (#372).
Bereitstellungen und Verfassen
Eine funktionierende Bereitstellung wird niemals als fehlgeschlagen aufgezeichnet
Build output that carried a raw NUL byte or a broken Unicode character (as a failed
docker execDies geschieht, wenn der gemultiplexte Stream, die Frame-Header usw. verschüttet werden. Das Schreiben des Protokolls ist fehlgeschlagen, und OpenShip hat den abgelehnten Schreibvorgang falsch gelesen, da die Bereitstellung selbst fehlgeschlagen ist: Eine aktive, laufende Bereitstellung wurde als fehlgeschlagen markiert und ihre Container wurden abgerissen, während die Bereitstellungsansicht bei „Bereitstellung“ hängen blieb. Gespeicherte Build-Protokolle werden jetzt bereinigt und in der Größe begrenzt, der Ergebnisschreibvorgang löscht alle Protokolle oder Fehler, die Blob Postgres ablehnt, anstatt den Status zu verlieren, und das Terminalereignis, das den Livestream schließt, wird immer ausgelöst.Ihre Zugriffs-URL und benutzerdefinierten Domänen-Ports überstehen eine erneute Bereitstellung
A project's deploy target is now stored durably on the project itself (a new
server_idSpalte) statt nur in den flüchtigen Metadaten der neuesten Bereitstellung zu leben. Früher konnte ein neuer oder teilweiser Snapshot diese Bindung verlieren, das Projekt stillschweigend auf eine lokale Bereitstellung zurückführen, die Ports von seinen benutzerdefinierten Domänen entfernen (ein 502) und die Zugriffs-URL auf zurücksetzenlocalhost:3000; Bestehende servergehostete Projekte werden aufgefüllt, sodass sie bei der nächsten erneuten Bereitstellung nicht beschädigt werden können. Eine verifizierte benutzerdefinierte Domäne wird auch dann beibehalten und nicht gelöscht oder ausgeblendet, selbst wenn sie im Endpunktsatz einer Bereitstellung weggelassen wird. Nur selbst gehostet.Eine kostenlose Domäneninstallation verfügt jetzt über ein Bereitstellungsziel
A box set up with a free
.opsh.ioDie Domäne konnte das Onboarding ohne aufgelistete Server und ohne Bereitstellungsmöglichkeit abschließen, da die Registrierung der lokalen Zeile „Dieser Server“ an einem Bootstrap-Schritt hing, der von diesem Pfad nie ausgeführt wird. Das Feld materialisiert jetzt seine eigene Deploy-Target-Zeile, wenn Server zum ersten Mal aufgelistet werden, wenn es eine Verbindung zu OpenShip Cloud herstellt und beim Zurücksetzen durch den Administrator. Anhängen eines kostenlosen.opsh.ioWenn Sie später eine Domäne zu einem Projekt hinzufügen möchten, muss nicht mehr zuerst erneut bereitgestellt werden, da nun bei jeder Bereitstellung das Kästchen vorbereitet wird, um die Besitzüberprüfung zu beantworten. Nur selbst gehostet.Servicedomänen berücksichtigen Ihr Upload-Limit und Ihre Proxy-Einstellungen
A compose service's own domain ignored the project's reverse-proxy tuning, so the main app would accept a 50 MB upload while the same project's service domain rejected it at nginx's 1 MB default with a 413. Those settings now apply to every domain a project writes — per-service, static, single-domain composites, path fan-out, and single-app native deploys. Self-hosted only.
Katalog-App-Dienst-URLs werden pro Port aufgelöst und sind nie leer
Apps that route one container port to a domain and leave another port-only (Convex, for one) used to get an empty or self-referential origin injected (
CONVEX_SITE_ORIGIN="", oder ein127.0.0.1dass innerhalb eines Containers auf den Container selbst zeigt). Jeder Port wird jetzt unabhängig aufgelöst, ein Port-Only-Dienst greift auf den tatsächlich erreichbaren Port der Box zurückhttp://host:port, und a{{publicUrl:…}}Das Token, das immer noch nicht aufgelöst werden kann, wird nicht gesetzt – es gilt also der eigene Standardwert des Images – mit einer lauten Warnung im Bereitstellungsprotokoll anstelle eines stillen Leerzeichens.Die Routing-Warnung informiert Sie darüber, wann die Kante das Problem darstellt
When a deploy succeeds but its domains aren't being served, the post-deploy warning now checks why: if the edge container itself is down it tells you to bring the edge back up, instead of sending you off to your DNS provider to debug routes that are actually fine. Self-hosted only.
Upgrade-Hinweis: In dieser Version werden die Versionen mit angehefteten Kanten und E-Mail-Bildern aktualisiert. Öffnen Sie beim Selbsthosten die neue Infrastrukturansicht, um den Edge- und Mail-Container jedes Servers auf dem angehefteten Image zu aktualisieren – oder aktivieren Sie die instanzweite automatische Aktualisierung, damit die Steuerungsebene dies bei jedem Upgrade durchführt.