← سجل التغيير

v0.6.1

A large release. It adds a full service-to-service networking plane, around-the-clock container health monitoring, and real analytics with visitor geography and usage history — plus a self-contained containerized mail engine, a fleet-wide infrastructure view with one-click updates, an audit log you can filter and attribute, Telegram alerts, and a Node-based installer that retires the last of the Bun crash class.

إصدار 1.
7 أغسطس2026v0.6.1الميزاتإصلاحاتBreaking52 تحديثات

شبكات خدمة إلى خدمة

  • يمكن الآن توصيل أي مشروع بآخر عبر الشبكة الداخلية

    Every project (a plain single-app, a raw Compose stack, a monorepo, or an imported one) now shows a Connection card with its internal address (http://<alias>:<port>) ويمكن اختياره كمصدر "الاستخدام في المشروع". في السابق، كان من الممكن الوصول داخليًا فقط إلى تطبيقات الكتالوج التي تحتوي على كتلة اتصال معلنة، أو مكدسات إنشاء متعددة الخدمات؛ لم يكن لمشروع التطبيق الواحد عنوان داخلي على الإطلاق. تكون إمكانية الوصول إلى نفس الحدود تلقائية ويظل عبور الحدود واضحًا - يصبح الاسم المستعار قابلاً للوصول فقط بمجرد ربط المستهلك بالشبكة. تتم الاستضافة ذاتيًا فقط، ويتم تخطيها للمواقع الثابتة (لا يوجد منفذ استماع) والتطبيقات المستضافة على السحابة (والتي ترتبط عبر الجمهور بدلاً من ذلك).

  • امنح الخدمة اسم مضيف داخليًا مخصصًا

    A service can carry a custom east-west DNS alias that resolves alongside its default name, set from the service's Settings tab and available to single-app, Compose, and monorepo services alike. Openship normalizes it to a valid hostname and rejects one that collides with another service on the same project network, and the internal-address card shows the alias its containers actually answer to. Self-hosted only.

  • محرر إعدادات الخدمة أكثر وضوحًا

    The service Settings tab groups fields into labelled sections and swaps free-text boxes for structured editors: ports and volumes are entered as chips (with per-item limits enforced as you type) and depends-on is a picker of the project's other services. The image and build-from-source fields are shown together — fill either, and a build context wins over a stale image — instead of an image/build mode toggle.

صحة الحاويات والحوادث

  • OpenShip يراقب حاوياتك على مدار الساعة، وليس فقط عند النشر

    Until now a container was health-checked exactly once, during the ~15s window right after a deploy, and then never looked at again unless a human was staring at the project page. A new health watch polls every server's Docker daemon once a minute (and reacts within about 10 seconds when Docker itself reports a container dying or restarting), so an app that falls over or drops into a crash loop at 3am raises an alert through your existing notification channels instead of waiting for a user to complain. Self-hosted only.

  • تقوم الحاويات المكسورة بصفحتك مرة واحدة، وليس كل دقيقة

    A container stuck in a restart loop is broken on every poll, so a naive watcher would fire 60 alerts an hour about one fault. Instead each fault becomes a single incident: one message when it opens, one more only if it gets strictly worse (unhealthy → crash looping → down), and one all-clear that tells you how long it was down. A fault must be observed twice before it notifies, and an in-flight deploy, an operator's own docker stopأو أن المشروع المعطل لا يطلق إنذارًا كاذبًا أبدًا.

  • الخادم الذي لا يمكن الوصول إليه هو تنبيه واحد، وليس تنبيهًا واحدًا لكل تطبيق عليه

    When a box's Docker daemon stops answering, Openship opens a single server-level incident that names how many projects it can no longer monitor, and freezes those projects' health rather than falsely marking them recovered. The record is durable, so a box that has been down for days does not re-page every time the control plane restarts.

  • علامة التبويب "الحالة الصحية" في كل مشروع، مع تاريخ الحوادث لمدة 30 يومًا

    Each project gets a Health tab listing its currently open incidents plus a rolling 30-day history of resolved ones with downtime durations. It also states whether monitoring is actually switched on (an operator toggle in the Jobs module) and surfaces the server's own outage when a box is unreachable, so an empty tab is never misread as "all good." Self-hosted only.

التحليلات واستخدام الموارد

  • انظر من أين يأتي زوار موقعك

    The Monitoring tab draws a per-country choropleth of visitors alongside a ranked list, and animates real-time request ripples fed by the same stream the Logs tab tails, so you can watch where requests are landing right now. It works the same way self-hosted and on Cloud, and it can tell "no visitors yet" apart from "geo lookups aren't set up on this box," which used to render identically as an empty map. On a multi-domain project the whole view scopes to a chosen domain.

  • أعداد الزوار هي أرقام حقيقية الآن، وليس أعداد الطلبات

    The dashboard's visitor figure was a request count relabelled "unique IPs," so five page views from one browser counted as five people. It's now a genuine count of distinct visitors, deduplicated at the edge with a per-day salted hash that never stores an address or a per-visitor row — the number is honest while still collecting no behavioural data on your end users.

  • أهم المسارات ورموز الاستجابة التي تحتوي على بيانات حقيقية خلفها

    The Top Paths table was hardcoded empty and error rate couldn't be answered from anything saved. Both are real now: the daily rollup records normalized request paths (query strings stripped, ids collapsed, so tokens never become keys) and the full status-code mix, and a new card expands each 2xx/3xx/4xx/5xx class to the exact codes beneath it. On self-hosted, per-path aggregation is opt-in per project (a toggle, default off, including on existing projects) because it adds measurable work to every request the edge handles; on Cloud paths are aggregated automatically. Every other analytics dimension is unchanged.

  • يتم الاحتفاظ بسجل الاستخدام، حتى تتمكن من معرفة ما أدى إلى حدوث عطل

    CPU, memory and network usage used to exist only as a live stream that vanished when you closed the tab, so "was memory climbing before it got OOM-killed at 3am" had no answer. Usage is now sampled on a schedule into 5-minute buckets and charted over time, per service. A Compose project reports its whole stack with a per-service breakdown and an All/service scope picker instead of just the one container the primary service owned; a static site (nothing to measure) now says so plainly instead of showing four zeroed metrics. Self-hosted Docker deployments; bare non-Docker deployments report zero network, since per-process accounting isn't available there.

  • تحتفظ المجالات المزدحمة بتحليلاتها

    A domain pushing more than about 2 GB in a single minute (roughly 286 Mbps — routine for video or large downloads) used to overflow a 32-bit byte counter and kill the analytics scrape for that entire domain, so the busiest sites were precisely the ones with no analytics. The bandwidth counters are now 64-bit and collection keeps up. Self-hosted edge.

  • لم تعد التحليلات تختفي بهدوء عندما لا ينظر أحد

    Traffic analytics live in the edge's memory under a TTL and were only flushed to the database when someone opened a project's Analytics tab, so a project nobody viewed for a day lost its per-minute data. A background scrape job now persists every server's analytics on a schedule whether or not anyone is watching, collecting a whole server in one pass instead of a separate memory scan per domain.

  • يمكن قراءة تلميحات أدوات الرسم البياني في كل موضوع

    Tooltips were effectively transparent in the dark themes (plot lines showed straight through the text) and on light cards the hover marker rendered as a stray white block below the tooltip. Both are fixed with a shared tooltip style reused across the monitoring and billing charts.

الحافة والوكيل العكسي

  • ضبط الوكيل العكسي لكل مشروع

    A project's Routing settings now expose a full set of proxy tunables instead of a handful: raise or entirely remove the upload size limit, set connect/read/send/keepalive timeouts, control response buffering and gzip level, turn on HTTP/2, tighten request-header limits, and verify TLS to the upstream — each value validated before it reaches the generated nginx config and labelled with its own directive name. On self-hosted it also reads back what the edge is actually serving next to what you saved, flags any drift in colour, and offers a one-click adopt, so a hand-edited vhost or a value the sanitizer dropped can't quietly disagree with your settings. Self-hosted only.

  • تعمل التحليلات والقواعد الخاصة بكل دولة على حافة الحاوية

    The containerized edge shipped without the MaxMind geo library or its country database, so every lookup returned nothing: no per-country analytics were recorded, and country-based route rules failed closed (a single-country ban silently blocked all traffic). The library and a GeoLite2 database — parsed and validated before shipping — are now baked into the edge image, so geo works from a box's first install with no runtime download.

  • قم بتصحيح هوية الزائر خلف Cloudflare أو موازن التحميل

    Behind a proxy the edge treated the proxy as the client, which broke four things at once: visitor country resolved to the PoP, distinct-visitor counts collapsed, per-IP rate limits put the whole planet in one bucket, and IP bans banned a PoP instead of a visitor. The edge now recovers the real client address from CF-Connecting-IP، الثقة في نطاقات Cloudflare المنشورة فقط باعتبارها النظير المتصل.

  • تصل القواعد لكل مسار إلى الحافة حتى عندما لا تكون موجودة في استرجاع واجهة برمجة التطبيقات

    Pushing a project's route rules to a local edge now goes through the same resolved edge-management path as the rest of Openship instead of assuming the edge lives on the API host's own loopback. On setups where it doesn't — such as the containerized edge — rate-limit, ban, and country rules now actually take effect.

  • تتطابق حبوب منع الحمل "Edge Ready" مع الحالة الحقيقية للخادم

    Edge readiness is now read from whether Openship's edge container is actually running, the same fact the Infrastructure tab and System Health use. Before, a leftover bare-host OpenResty install could make the pill claim "ready" while the server tab reported the edge as down.

النطاقات المخصصة والمجانية

  • مجانًا .opsh.io تقوم المجالات بالتوجيه فقط إلى الخادم الذي أثبتت سيطرتك عليه

    Openship Cloud's shared edge now forwards a free subdomain to your server only after that server answers a challenge proving it owns the target, a proof that lasts 90 days and that Cloud re-checks about a week before it lapses. Openship prepares the box to answer the moment you set up its edge, so a free domain added later works without a redeploy, and a background sweep re-asserts, reads back over the server's own public address, and re-verifies anything expired — so a box left undeployed for months no longer silently loses its free URLs. A slug can't be pointed at someone else's box, and a server that can't yet answer is told why. Requires Openship Cloud.

  • تعمل النطاقات المجانية والمخصصة الآن على المواقع الثابتة

    Adding a free .opsh.io المجال إلى مشروع ثابت يستخدم لتسجيل أي شيء على الحافة، لذلك ينتقل عنوان URL إلى حرف البدل بدون أصل خلفه؛ تحرير مجال المشروع الثابت لم يكتب أي مضيف حتى إعادة النشر التالية. كلاهما يصدر الآن مسارًا حقيقيًا في اللحظة التي تحفظ فيها، ويخدم ملفات المشروع المبنية - وهو نفس السلوك الذي اتبعته تطبيقات الوكيل بالفعل.

  • لم تعد الشهادة التي تم إصدارها ولكنها واجهت مشكلة بعد ذلك مفقودة

    If an ACME order completed but a later step failed (the vhost rewrite, the reload, or the read-back), the domain stayed stuck in "provisioning" with no expiry recorded, which made it invisible to the renewal sweep — a valid certificate then sat on the edge and expired ~90 days later. Openship now re-reads the edge after a failed issuance and records a certificate that's actually present, so renewal stays scheduled.

  • يتم رفض المجالات المخصصة غير الصالحة عند الباب

    Setting a custom domain to something that isn't a public hostname (localhost، أو عنوان IP مجرد، أو تسمية واحدة، أو قيمة ذات مسار/منفذ/مخطط) تُستخدم لإرجاع النجاح، وسك صف مجال معلق ميت، وحتى كتابة server_name localhost; vhost على الحافة المشتركة. تتحقق مسارات الكتابة الآن من صحة أسماء المضيفين المخصصة وترفض الأسماء السيئة، مع الاستمرار في السماح للمشروع الذي يحمل بالفعل قيمة سيئة بتحريرها وإزالتها.

  • لم يعد تحرير النطاق المجاني يُظهر رسالة "مطلوب اتخاذ إجراء" كاذبة

    A single edit could sync the same free subdomain to Cloud twice, and the two racing challenges reset each other's token, so the route worked but the project reported "Action Required" anyway. Callers that run their own managed-edge sync now suppress the duplicate, so each edit issues one challenge and the status reflects reality.

  • تسري عمليات إعادة التوجيه وحدود التحميل عند الحفظ

    Raising a route's upload limit or adjusting its timeouts now applies as soon as you save instead of waiting for the next redeploy, and a domain redirect is applied live to static-site domains too, not only to proxied apps.

البريد الإلكتروني

  • يعمل البريد كمحرك مستقل بدلاً من السيطرة على الخادم الخاص بك

    Setting up mail no longer installs iRedMail's daemons directly onto the host or reboots the box. Postfix, Dovecot, spam and virus filtering, and DKIM now run inside a single openship-mail حاوية بقاعدة بيانات vmail الخاصة بها في ملف جانبي Postgres، ومتصلة بالشبكة المضيفة بحيث يظل البريد يرى عناوين IP الحقيقية للعميل وتظل الحافة خارج مسار بيانات البريد. يتلخص الإعداد في ثماني خطوات متطلباتها الأساسية الوحيدة هي Docker وحافة openship، وكل جزء من حالة البريد (قائمة الانتظار، وأدلة البريد، ومفاتيح DKIM، والتكوين) يعيش على عمليات ربط المضيف، لذا فإن الترقية هي عملية سحب وإعادة إنشاء تحافظ على بياناتك. استضافة ذاتية فقط.

  • يستخدم البريد نفس الحافة وTLS مثل كل شيء آخر

    Mail setup no longer stands up its own host OpenResty and certbot on the side. The certificate for mail.<domain> يتم إصداره من خلال حافة openship المشتركة، وهو نفس المسار الذي يسلكه كل TLS للنطاق الآخر، ويتم تسجيله الآن للتجديد مثل أي مجال آخر - شهادة بريد على حافة حاوية (لا يوجد مؤقت certbot مضيف) تُستخدم لتنتهي صلاحيتها بعد 90 يومًا من التثبيت، بصمت؛ يؤدي التجديد الفاشل الآن إلى ظهور إشعار.

  • تم إعداد خوادم البريد قبل مواصلة العمل بالحاويات

    The move to containers is topology-aware, so a server whose mail was installed the old way (system daemons, database on the host) still reports accurate component health and stays fully manageable: SQL queries, outbound SES/SMTP relay config, and daemon restarts all target the right engine. When the engine genuinely is stopped or was never installed, admin actions now return a clear message telling you to restart it or re-run setup instead of a bare 500 leaking a Docker "No such container" error.

البنية التحتية عن بعد

  • شاهد كل حاوية بريد وحاوية مدارة في مكان واحد

    A new Infrastructure view lists each server's edge and mail container with the image version it's running against the version this release pins (for example edge 0.4.0 → 0.5.0), and flags which are behind, stopped, or missing. An attention rollup surfaces the ones that genuinely need hands — an edge that's down, or absent on a box that hosts projects — separately from the ones that merely have an update available. Self-hosted only.

  • قم بتحديث الحاوية أو إصلاحها أو تثبيتها دون لمس الغلاف

    Update swaps a behind container onto the pinned image (rollback-guarded), Fix restarts a stopped one in place, and a server with no edge gets a one-click Install that runs the first- install path with 80/443 takeover consent. Each apply streams its pull/recreate/ verify progress and survives a dropped connection, and a fleet-wide Update all / Restart stopped does the same across every server at once. Self-hosted only.

  • قم بالتحديث التلقائي للبنية الأساسية البعيدة لديك عند الترقية

    A new instance-wide toggle lets the control plane update every remote edge and mail container automatically when you upgrade Openship (its APP_VERSION يتحرك للأمام)، لذا فإن الأشعة تحت الحمراء لأسطولك تتعقب الإصدار الذي تقوم بتشغيله دون الحاجة إلى مسح يدوي. إنه من جانب الخادم، لذا فهو يعمل على سطح المكتب أيضًا، وهو يختلف عن التحديث التلقائي لتطبيق سطح المكتب، ويتم إيقاف تشغيله افتراضيًا. استضافة ذاتية فقط.

  • يبقى اكتشاف الانجراف محدثًا من تلقاء نفسه

    With auto-scan on (the default), opening the Infrastructure tab or the home page quietly runs one detect-only scan when the cached state is stale, throttled to about every 30 minutes per browser, so the attention dot reflects reality without pressing Scan. It only refreshes what's shown — it never applies an update, which stays the separate auto-update toggle. Self-hosted only.

  • لم يعد يتم وضع علامة على المربعات القديمة على أنها مكسورة

    A server converted to the containerized edge kept listing its leftover host OpenResty as a component with an Update button for a config nothing loads; those superseded host modules are now dropped from the view. And a legacy host-native mail engine (systemd Postfix/Dovecot) that was quietly delivering mail used to show up as "Stopped, container missing" — it's now labelled as not containerized rather than inventing a version. Self-hosted only.

Docker ترحيل

  • تحتفظ المواقع التي تم ترحيلها بحد التحميل والمهلات التي تم تشغيلها بموجبها

    When you move or take over a Docker stack, the reverse-proxy tunables the source vhost declared (upload size limit, upstream read timeouts) are now carried onto the migrated project before the new edge vhost is rendered. Previously the site silently reverted to nginx's 1 MB / 60 s defaults at cutover, so the first large upload after a move failed with a 413 and nothing tied it back to the migration. Adoption is additive: a limit you set by hand always outranks a value inferred from the old box. Self-hosted only.

  • لم يعد اعتماد المكدس يعيد نشر المنافذ الداخلية

    A compose service that published a container port on a random host port (a single-part ports: دخول، على سبيل المثال. قاعدة البيانات 5432 (المصدر لم يتم كشفه أبدًا) يتم الآن تركه غير مكشوف أثناء الاعتماد بدلاً من إعادة نشره على الهدف، لذلك لا يؤدي الترحيل دون داع إلى كشف الخدمات الداخلية أو الاصطدام بأي شيء يحتوي بالفعل على منفذ مضيف. لا يزال المنفذ يظهر في المعالج حتى تتمكن من التوجيه إليه، وتستمر حركة المرور من خدمة إلى خدمة في حلها حسب الاسم عبر الشبكة المشتركة. استضافة ذاتية فقط.

  • يخبرك المعالج عن env vars التي لم يتم ترحيلها

    When adopting a foreign stack, environment variables that exactly match the image's baked-in defaults are dropped rather than imported as explicit config (the image still supplies them at runtime). The wizard now lists exactly which keys were skipped and why — common with Coolify/Nixpacks images that bake config as ENV layers — so you know what to re-enter if you later change the image.

  • لا مزيد من أسماء المضيفين الوهمية في معالج الاستيراد

    The wizard used to invent a hostname from the project name whenever a step had no route chosen, labelling port fields, previewing monorepo sub-app hosts, and even wiring the "Visit Site" button to a host that would never exist. It now shows only hosts your config actually names, and hides "Visit Site" entirely when the deployment has no public domain.

سجل التدقيق

  • تعرف بالضبط على ما تغيره مساعد الذكاء الاصطناعي الخاص بك

    Every audit entry now records where the action came in from (the dashboard, an MCP client, the CLI, the API, a webhook, or the system itself), and you can filter the log down to a single source. Isolating MCP-driven activity finally answers "what did the AI assistant do," which was impossible before because an MCP write and a CLI write produced identical rows. Entries written before this release show as an honest "unknown" rather than being mislabelled.

  • قم بإيقاف تشغيل التدقيق والتحكم في مدة الاحتفاظ به

    Each organization can switch audit recording on or off and pick a retention window (7, 30, 90, 180 or 365 days). Turning recording off stops new entries but never touches the ones already written, and the act of disabling is itself logged first, so the trail always explains why it went quiet. The switch is per-organization, so on a shared cloud instance one tenant can't disable everyone's audit log.

  • شريط تصفية حقيقي فوق السجل

    You can narrow by category, actor, date range and free-text search, with a live count on every category tab. Search resolves project, server and domain names, so typing a name like "api-gateway" turns up entries that only ever stored an opaque id, and rows now display the human name of the affected resource, resolved server-side in one batched lookup per page.

  • لم يعد سجل الترحيل يتخطى الصفوف أو يكررها

    Entries that share a timestamp are now ordered by a stable tiebreaker, so scrolling through pages no longer reshuffles them; two entries created in the same instant could previously appear twice or vanish between pages.

الإخطارات

  • إرسال التنبيهات إلى تيليجرام

    Telegram joins email, Slack, Discord, and Teams as a notification channel: point a BotFather bot at a chat, group, or forum topic and Openship delivers your deploy, health, and job alerts there. The bot token is stored encrypted, and the channel list shows which bot does the sending.

  • تقوم إعدادات الإشعارات المستضافة ذاتيًا بإسقاط مفاتيح التبديل التي لا يمكن إطلاقها أبدًا

    On a self-hosted box the billing notification categories are fed by the SaaS billing system, so they were switches that could never send anything. They no longer appear, and the remaining categories are organized into tabbed groups in Settings.

التثبيت والتعبئة

  • يتم الآن تثبيت OpenShip وتحديثه على Node، وليس على الإطلاق على Bun العالمية

    الـ curl | sh ويقوم مثبتو PowerShell بتنزيل حمولة CLI قائمة بذاتها تم التحقق منها بواسطة sha256 والتي تعمل ضمن Node: فهم يستخدمون نظامك Node 22+ إذا كان لديك واحدة ويبيعون Node 22 رسميًا منNodejs.org إلى ~/.openship، وتنقلك تلقائيًا من التثبيت العام السابق لـ Bun دون المساس بنسخة Bun الخاصة بك. openship update يأخذ نفس المسار - إعادة تنزيل الحمولة التي تم التحقق منها، وتحديث وقت التشغيل أولاً - لذا فإن الترقية التي ترفع مستوى العقدة تشفي نفسها بدلاً من الانهيار. يؤدي هذا إلى إيقاف فئة الأعطال Bun-vs-ssh2 التي يمكنها تنفيذ عمليات SSH عن بعد.

  • يأتي خادم البريد كصورة رسمية

    Openship's official multi-arch (amd64 + arm64) image set, built and published to GHCR and Docker Hub each release, now includes openship-mail جنبًا إلى جنب مع واجهة برمجة التطبيقات ولوحة المعلومات والصور الطرفية، لذلك لم يعد من الضروري إنشاء محرك بريد مستضاف ذاتيًا من المصدر.

  • openship up يعمل الآن تحت Docker بدون جذور بدلاً من الفشل بشكل خفي

    Bringing up the compose stack on a rootless daemon used to abort the install with Docker's opaque "error while creating mount source path … permission denied," because a rootless daemon can't create the edge's bind-mount directories under root-owned paths. The CLI now creates those directories itself and, when it can't, prints the exact one-time sudo mkdir/chown أوامر التشغيل (#372).

عمليات النشر والتأليف

  • لا يتم تسجيل عملية نشر العمل على أنها فاشلة أبدًا

    Build output that carried a raw NUL byte or a broken Unicode character (as a failed docker exec يفعل عندما ينسكب دفقه المتعدد ورؤوس الإطارات وكل شيء) مما أدى إلى فشل كتابة السجل، وأخطأ OpenShip في قراءة رفض الكتابة حيث فشل النشر نفسه: تم وضع علامة على النشر المباشر قيد التشغيل بأنه فشل وتم هدم حاوياته، بينما ظل عرض النشر عالقًا في "النشر". يتم الآن تعقيم سجلات البناء المخزنة وتحديد حجمها، وتتخلص كتابة النتيجة من أي سجل أو يرفض كائن ثنائي كبير الحجم خطأ Postgres بدلاً من فقدان الحالة، ويتم دائمًا تشغيل الحدث الطرفي الذي يغلق البث المباشر.

  • يبقى عنوان URL للوصول ومنافذ المجال المخصص الخاصة بك بعد إعادة النشر

    A project's deploy target is now stored durably on the project itself (a new server_id عمود) بدلاً من العيش فقط في البيانات التعريفية المتقلبة لأحدث عملية نشر. من قبل، قد تفقد لقطة جديدة أو جزئية هذا الارتباط، وتتراجع المشروع بهدوء إلى نشر محلي، وتجرد المنافذ من نطاقاتها المخصصة (502)، وتعيد تعيين عنوان URL للوصول إلى localhost:3000; تتم إعادة ملء المشاريع الحالية التي يستضيفها الخادم، لذا لا يمكن أن يعضها هذا في عملية إعادة النشر التالية. يتم أيضًا الاحتفاظ بالمجال المخصص الذي تم التحقق منه بدلاً من حذفه أو إفراغه حتى عندما تحذفه مجموعة نقاط نهاية النشر. استضافة ذاتية فقط.

  • أصبح لدى التثبيت المجاني للمجال الآن هدف نشر

    A box set up with a free .opsh.io يمكن أن ينتهي المجال من الإعداد مع عدم وجود أي خوادم مدرجة ولا يوجد شيء للنشر فيه، لأن تسجيل صف "هذا الخادم" المحلي قد توقف عن خطوة التمهيد التي لا يعمل المسار أبدًا. يجسد المربع الآن صف هدف النشر الخاص به عند إدراج الخوادم لأول مرة، وعندما يتصل بـ OpenShip Cloud، وعند إعادة تعيين المسؤول. إرفاق مجانا .opsh.io المجال إلى مشروع لاحقًا لم يعد بحاجة إلى إعادة النشر أولاً، نظرًا لأن كل عملية نشر تقوم الآن بإعداد المربع للإجابة على التحقق من الملكية. استضافة ذاتية فقط.

  • تلتزم نطاقات الخدمة بحد التحميل وإعدادات الوكيل

    A compose service's own domain ignored the project's reverse-proxy tuning, so the main app would accept a 50 MB upload while the same project's service domain rejected it at nginx's 1 MB default with a 413. Those settings now apply to every domain a project writes — per-service, static, single-domain composites, path fan-out, and single-app native deploys. Self-hosted only.

  • يتم تحديد عناوين URL لخدمة تطبيق الكتالوج حسب المنفذ ولا تكون فارغة أبدًا

    Apps that route one container port to a domain and leave another port-only (Convex, for one) used to get an empty or self-referential origin injected (CONVEX_SITE_ORIGIN=""، أو أ 127.0.0.1 التي توجد داخل الحاوية تشير إلى الحاوية نفسها). يتم الآن حل كل منفذ بشكل مستقل، وتعود خدمة المنفذ فقط إلى ما يمكن الوصول إليه فعليًا في الصندوق http://host:port، و أ {{publicUrl:…}} يتم ترك الرمز المميز الذي لا يزال يتعذر حله بدون تعيين - لذلك يتم تطبيق الإعداد الافتراضي للصورة - مع تحذير عالي الصوت في سجل النشر بدلاً من تركه فارغًا صامتًا.

  • يخبرك تحذير التوجيه عندما تكون الحافة هي المشكلة

    When a deploy succeeds but its domains aren't being served, the post-deploy warning now checks why: if the edge container itself is down it tells you to bring the edge back up, instead of sending you off to your DNS provider to debug routes that are actually fine. Self-hosted only.

ملاحظة الترقية: يتخطى هذا الإصدار الحافة المثبتة وإصدارات صور البريد. في حالة الاستضافة الذاتية، افتح عرض البنية التحتية الجديد لتحديث حافة كل خادم وحاوية البريد على الصورة المثبتة - أو قم بتشغيل التحديث التلقائي على مستوى المثيل ليقوم مستوى التحكم بذلك في كل ترقية.